logo
Your current locatoin : Home >>What we sell >>Garbage Trucks >>Skip Loader Truck

Skip Loader (Dumper Placer)Garbage Truck

  • Item No:1140B1
  • Model:DFL1140B1  
    Power:185HP  
  • Capacity:8CBM  
    Driving Mode:4 x 2  
  • Price: $39000

I am interested in this truck /trailer

  • Overall Views : 1396
  • Read all reviews Submit your review
  • Share with friends:

Skip Loader (Dump Placer)Garbage Truck

Model: DFL1140B1

Nominal Container Capacity: 8 Cubic Meters

Nomial Lifting Capacity: 5,000kg

 

1.:Skip Loader Chassis Specification

1.1  Main Application

For haulage of solid waste/refuse of average density of 900kg/m3 in and around sub-urban centres of Accra where ambient temperatures are about 40 oC.

 

1.2 Principal Features

a.The equipment to be supplied under this contract is new and of the most current model 2013

b.Left-hand drive

c.Power asssitance steering

d.4x2, rear axle drive

e.Three (3) persons seating capacity

f.Water-cooled, four-stroke cycle diesel engine

g.Flywheel horsepower:  185hp@2500rpm

h.Hydraulic lifting/tipping gear with control system

i.Lifting capacity: 5,000 kg

j.Power-take-off to drive the hydraulic pump

k.Payload of fully equipped and loaded truck (including container) :  12,500kg minimum

l.Rear axle rating:  10,000kg approx.

m.GVW:  16,000kg minimum

n.Gradability (max. restart gradient off highway at GVW):  30% 

o.Ground clearance:  270 mm

 

1.3 Engine

Water-cooled,four-stroke cycle diesel engine with the following features:-

a. Vertical ,in line        

b. Flywheel horsepower:185hp@2500rpm

c. Flywheel horse power 136(kw) /2500(rpm), torque and engine speed 700(N.m)/1300-1500(rpm)

as well as aver-age fuel consumption 15L/100km .h ;Engine manufactuer Dongfeng Cummins, model:ISDE185 30

d. Lubrication: forced lubrication

e. Lubricant filtration:filter

i. Full-flow and by-pass  

ii. Replaceable element/ cartridge;

f. Lubricant cooler equipped

g.Fuel System: Direct Injection

h.Fuel filtration:filter

i.Primary and Secondary

ii.Replaceable element/ cartridge

i.Fuel-water separator required in fuel line

j.Fuel tank capacity:  160 litres

k.Fuel tank cap with security lock

l. Specify the following:

i.Mechanical fuel injection pump

ii.Mechanical Governor

m. Cooling System:  Heavy duty pressurised water cooling with sufficient capacity to function in the specified ambient temperature

n.  Radiator fins and tubes to be made of copper

o.   Radiator protection grille

p.   Natural aspiration

q.   Heavy-duty ,dry-type air cleaner with replaceable elements

r.   Pre-cleaner fixed.

s.   Pre-ignition heating system

 

1.4 Clutch

a. Heavy duty, dry single plate; hydraulic actuation .

b. Specify diameterΦ395mm

 

1.5 Transmission,PTO and Drive Line

a.Constant speed synchromesh gearbox

b.Floor-mounted manual shift gear lever

c. 5 speed forward and 1 speed reverse

d.Max. geared speed: 95km/h

e.Manufacturer's standard PTO box is provided

f.4 x 2 WD truck; single rear axle drive

g.Gradability (max restart gradient off highway at GVW): 30%

 

1.6 Chassis Frame

a.Heavy-duty all steel constructed frame to be reinforced with cross members

b.Front towing hook

c.Front steel bumper

d.Front fenders have mudflaps

e. Full rear steel mudguards with mud flaps

f. Specify the following:

i.Frame sectional modulus :250mm× 80mm×  (7+4)mm

ii.Tensile strength of frame material Q235A high strength steel.

 

1.7 Axles

a.Torque proportioning differ-ential rear axle with foot-operated or otherwise differential lock

b.Hub reduction floating rear axle

c. Rear axle rating: 10,000kg approximately

d. Rigid I beam front axle

 

1.8 Suspension

a.Front:

i. Heavy duty semi-elliptic leaf spring

ii.Double acting telescopic shock absorbers

b.Rear:

i.Heavy duty semi-elliptic leaf spring

ii.Second stage helper spring

c.Sring details:Front 8pcs /rear 10+8pcs

 

1.9 Steering

a.Power assistance steering

b. Left hand steering control

c. 350 mm steering radius approx

 

1.10 Brakes

a.Power assisted hydraulic actuation service brakes built into all four wheels

b. Independent dual line system

c. All drum internal expanding

d. Foot-operated engine brake

e. Brake boosters with protection as applicable

f. Automatic drain valve on air tank(s)

g. Mechanical release parking brakes

 

1.11 Wheels ,Rims&Tires

a.Single front; double rear wheels

b.Good quality heavy-duty on/off road type suitable to full load rating, maximum speed and working conditions

c. Manufacturer's standard rims/ tires must, preferably, meet the following specifications: 

i.Tyre size: 10.00 R20,Ridus tire (ALL WHEELS)

ii.Tube tires with flaps preferred

iii.Bias Construction

iv.Ply rating; preferably 16 PR

v.Rim type:  Slip-on type with ring locker

vi.Lug type tread pattern

d. . One spare rim with tire mountable on a suitable carrier on each vehicle.

 

1.12 Cab & Accessories

a.Cab made of steel

b.Three person seating capacity

c.Seats cushioned with weather resistant heavy duty vinyl

d.Seat belts

e.Wide view toughened (Lamina-ted) wind screen

f. Two (2 No.) wipers

g.Floor covering:  rubber

h.Horn

i.Tropical ventilation; specify

j.Provide the following:

i.Dual sun visors

ii.Dual rear-view mirrors

iii.Rain gutters/drip mouldings

iv.Container hold-down strap

v In-Cab Pump Switch

vi In-Cab Pneumatic Controller

 

1.13 Instrumentation

a.Adequate instrumentation to be made up of service indicators as well as advance hazard warning devices. It shall include the following:

i.Fuel gauge

ii.Engine Coolant temperature gauge

iii.Engine oil level gauge

iv.Engine oil pressure gauge

v.Battery charging indicator

vi.Parking brake light

vii.Filters and fuel-water separator service indicators

viii.Speedometer and Odometer

ix.Reversing alarm

x.Engine speed tachometer

xi. Vandalism protection for instrument panel required

 

1.14 Electric System

a.12 volt system

b. Cab interior lighting

c. Instrument panel lighting

d. Two headlights minimum; high/ low beam

e. Tail/stoplights

f. Direction signal lights for front and rear

g. Reversing light

h. Parking light

i Number plate lights

j Specify the following:

i.AH rating of battery 24V

ii. Ampere rating of alter-nator 100A

iii.KW rating of starter 440CCA

k. Specify other maker's standard ancillaries

i.Model:6-QW-100DF;Capacity:120Min.

ii.Sizie(mm):409×170×209×232

iii.Module:1\4; Terminal:0\1;Mass:18.2kg

 

1.15 Protective Provision & Finish for Truck Chassis

a. Anti-corrosion provi-sions for the truck

b. Final color finish white.

2: Skip Loader Superstructuer Specification

2.1 General Description

a. Skip Loader (Dump Placer)Garbage Truck, mounted with 4x2 or 6x4 truck chassis is designed for for solid waste collection for hydraulic power loading of solid waste (from garbage containers), collection, transportation and mechanical unloading of the waste at the disposal site. Reliable hydraulic system ,mechnical system and electric systems are fitted for it. For haulage of solid waste/refuse of average density of 900kg/m3 in and around sub-urban centres of Accra where ambient temperatures are about 40 oC.

 

b. The garbage / refuse is directly collected into the containers which are placed at the various collection points in the busiest and most thickly populated areas of the city. The system with the loaded containers is transported to the dumping site and the same is tipped hydraulically to discharge its load.The available suitable container capacities are :8.0 cu. mtrs., 7.5 cu. mtrs, 6.0cu.mtrs, 5.5cu.mtrs and 4.5cu.Mtrs.

 

c. Advantages

It is a unique highly productive, easy to operate and low maintenance hygienic system to help in keeping a city clean. It is an effective and flexible method of handling debris/garbage/ refuse and discarded building materials.

The Skiploader range offers a perfect weight to capacity ratio to optimize the efficiency of your truck. The telescopic Skiploader provides a wider range of skip sizes and positions. A simple and easy control system ensures safe operation. The CSCTRUCK Skiploader is a member of the huge CSCTRUCK product family and is designed and produced according to the CSCTRUCK quality standards:

i. Low dead weight and maintenance-friendly

ii. Safety & longevity

iii. Efficient container handling

iv. Available in 2 versions:

v. Fixed arms

vi. Telescopic arms

 

d. Main specfications

i. Lifting capacity from groundlevel  8,000 (Kg)

ii. Lifting strength 800 mm subfloor 5,000 (Kg)

iii. Approx. Useable loadingcapacity(depending on chassis height)  ± 8,000 (Kg)

iv. Standard weight  ± 2,150 (Kg)

v. Pick up-time 44 (s)

vi. Unloading-time 36 (s)

vii. Jack legs out/in6(s)

viii. Fast off load emptycontainer 13 (s)

2.2 Principal Features

 

a. Loading/Discharge System:

i.    The system had been comprised the following:

      (a).Lifting/Tipping gear

      (b).Hydraulic Control System for the tipping/lifting gear

ii.  Lifting/Tipping gear

      (a). Lifting capacity: 8,000kg max

      (b).Compact all steel construction of beam with all welded joints to be of the continuous welding type.

iii.   The lifting beam shall have at its upper end a telescopics jib for lifting containers with loading heights of 1.2m approx.

iv.   Fuly automatic loacking /unlocking device for securing container onto truck.

v.    Wear resistant guide rollers at the rear end of steel reinfored sub-frame.

vi.   Specify the type of guide roller bearing and the method of lubrication

 

b. Hydraulic Control System

i. Two lif cylinders (operation pressure 16Mpa) two jacks hydraulic system. bore and stoke lifting capacity 34tons vertically. Two jacks in the rear of the truck,hydraulic controlled,operation panel box in rear left side of the truck.

ii. Hydraulic pump be driven from the PTO; Original PTO SDQ28/53 PQ1 ,Output torque 320NMN·m,ratio= 1.20(ψ);PTO from Chassis supplier well performanced with dongfeng orinignal DF6S900 transimission.

iii. Fullflow filtration of hydraulic oil offered.

iv. Pressure limiting valves for controlling pressures

v. Specify as followings:

a) Double acting Type of hydraulic pump and its performance pressures 16Mpa;

b)Capacity of hydraulic reservoir ,60L

c) Operating cycle time(loading dumping )at rated pump speed 60s@2000r/min.Unloading cycle time 20s@2000r/min.

d) Dump angle 85 degree

c. Dimensions and Weights

i. Payload of fuflly equipped truck including 8.0m3 container 8000kg minimum

ii. GVW:16,000kg minimum

iii. Ground clearance:240mm minimum.

iv. Wheelbase 4700mm(should accord to final design choice wheelbase)

v. Overall dimension/(L*W*H):approx 6000mm*2500mm*2830mm

 

d. Protective Provision & Finish for Superstructuer

i. Anti-corrosion provi-sions of the containers

For corrosion resistance container be coated with 2 coats of oxide primer(or similar)on the inner and outer sides of the container,2 coats of synthetic enamel orange painting (or similar) on the outside and 2 coats of black expoxy paint(or similar)on the inner side.Paint resistant to abrasion and aggressive environments.

ii. Final colour finish as request by buyer..  

e. Accessories:

i.    Fire extinguisher for the truck

ii.    Rear view Mirror

iii.   Front and rear mud flaps

iv.   Various vehicle part security,for example battery box,tool box ,others

v.Training: An operating and maintenance training for the buyer personnel is provided in our factory for 2 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 2 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Hubei China – Buyer’s Field – Hubei China” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.

vi. Operating and maintenance manuals and CD's in English language

Inquiry
Please feel free to contact us.
Copyright©2013 CSCTRUCK All Rights Reserved.
Tel:+86-181 0722 3279 Email: info@csctrucks.com
Friendly Links: cscwrecker
Quick Index:A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Online Service