logo
Your current locatoin : Home >>What we sell >>Garbage Trucks >>Side Loader Truck

Side-Loading Garbage Truck

  • Item No:ZJ0223W804K
  • Model:CSC5103ZZZ3  
    Power:120HP  
  • Capacity:7.5CBM  
    Driving Mode:4 x 2  
  • Price: $25600

I am interested in this truck /trailer

  • Overall Views : 995
  • Read all reviews Submit your review
  • Share with friends:


Side-Loading Garbage Truck /7.5CBM -4x2

CSCTRUCK Side loader is applicable and helpful in various municipal operations like carrying & loading rubbish or garbage mostly, clearing wastes removing debris etc.

 

Model: CSC5103ZZZ3

Drive Mode: 4* 2(LHD)

Nominal Volume of Container: appox 7.5m³

Nominal Loading Capacity,kg: 4600

Gross Tare Weigth,kg: 10000

Overall Dimension,mm: 6450×2260×2700

Wheelbase,mm: 4100

 

1: Side-Loading Garbage Truck Chassis Specification

1.1  . Main Application

For haulage of solid waste/refuse of average density of 900kg/m3 in and around sub-urban centres of Accra where ambient temperatures are about 40 oC.

 

1.2 Engine Model : EQH180-40 (DONGFENG CUMMINS )

High Pressure Common Rail, Water-cooled,intercooling turbchargeing system, four-stroke cycle diesel engine with the following features:-

a. Vertical ,in line        

b. Flywheel horsepower: 180hp(132kw)@2500rpm; Torque 650(N.m)/ 12001600 (rpm)

c. Displacement 4752ml ;Engine manufactuer DONGFENG CUMMINS, model: EQH180-40

i.Fuel tank cap with security lock

ii.Mechanical fuel injection pump

iii. Auxiliary fuel tank available

iii.Mechanical Governor

iv. Sufficient capacity to run the engine for not less than 20 hours for normal operating conditions.

d. Radiator fins and tubes to be made of copper

e. Natural aspiration

f. Pre-ignition heating system, Ignition system of engine have starter

g. Euro 4 emission standard

 

1.3 Cabin:

a. Short cabin,Full steel skeleton structure, covered with double layer steel plate;Can be tipped forwardly;High back damper seat with arm seat for driver;With inner A/C; with low temperature starting system, Cab be connected to the frame through buffer.Cab door’s windows could open and close easily.

b.Three person seating capacity front specify as :

i. Driver seat could be adjustable for high, front and rear movement, With seat belts. equipped with an absorber.

ii. Co-driver seat and mid-seat. With seat belts .

iii.Seats cushioned with weather resistant heavy duty vinyl

iv. Rear row with bunk.

c. Cold/hot airconditioner equipped

i. for Heating and cooling systems

ii. capable of maintaining a cabin temperature of +16°C in range of outside temperatures from -40°C to +40.

iii. Defrosting system that blow from below and is able to remove front and side frosting be provided.

d. Wide view toughened (Lamina-ted) wind screen for safety protection, and other glass be made with safety glass.

e. Full screen Two (2 No.) wipers sepcify as :

i. 2-speed plus “Intermittent operation”

ii. The wiper blades could be used during heavy snow and frosting when temperatures reach -40°C to +40°C.

f.Cab-interior be equipped with the followings:

i. Short-wave radio, tape player,

ii. Cigarette lighter

iii. Cup holder,

iv. Small thermos holder and other necessities for driver and passengers comfort.

v. Extingushers 2 nos.

 

g. Interior cabin, insulation and other accessories be covered with crack resistant in cold condition and made from non-combustible materials rubber paved in floor.

h.Horn    

 

1.4 Chassis Frame

a. Light-duty all strong steel constructed frame to be reinforced with cross members

b. Fitted with metal bow hooks front and rear.

c. Front bumper be made from strong metal.

d. Front fenders have mudflaps

e. Full rear steel mudguards with mud flaps

 

1.5 Transmission PTO and Drive Line

a.Constant speed synchromesh gearbox.

b.Floor-mounted manual shift gear lever

c. 9 speed forward and 2 speed reverse

d. Max. geared speed: 85km/h

e.Manufacturer's standard PTO box is provided

f.6x 4

g.Gradability (max restart gradient off highway at GVW): 28%

h. Min turning radius > 11.5m

i. Brake distance >5m

 

1.6 Clutch

a. Single dry frictional discHydraulic boosting .

b. Specify diameter Φ430mm

1.7 Steering:

a. Whole circulation in ball, hydraulic booster ;Power assistance steering

b. Right hand steering control

1.8 Brakes

a. Service brake, Brake gap can be adjusted automatically, double circulation air brake system

b. Assistant brake, Engine exhaust brake

c. Park brake, Potential springs pressing on middle and rear wheels

d. Foot-operated engine brake

 

1.9 Axles

a. Front axle Double-shoe pneumatic brake, non-driving steering axle

b.Rear axle Double-shoe pneumatic brake, ductile casting casing, with hub redactor, double reduction driving axle

c. Rear axle rating: 8490kg maximum

d. Rigid I beam front axle,loading 4000kg maximum

1.10 Suspension

a.Front:

i. Heavy duty semi-elliptic metal leaf spring

ii.Double acting telescopic parallel steel shock absorber .

b.Rear:

i.Heavy duty semi-elliptic metal leaf spring

ii.Second stage helper spring

 

1.11 Wheels ,Rims&Tires

a.Four wheels. Pneumatic tires capable of being driven in snow, muddy roads and off road.

b.Good quality heavy-duty off road type suitable to full load rating, maximum speed and working conditions

c. Manufacturer's standard rims/ tires meet the following specifications: 

i.Tyre size: 10.00R20,Ridus tire (ALL WHEELS)

ii.Tube tires with flaps

iii.Bias Construction

iv.Ply rating; 16 PR,

v. Rim type:  Slip-on type with ring locker,10.00

1.12 Electric System

a. 2*12V/180Ah

b. Generator 28V-35A ;could be capable of working at -40°C

c. Starter 5.4Kw/24V

d. Two headlights minimum; high/ low beam

e. Tail/stoplights

f. Direction signal lights for front and rear

g. Reversing light

h. Parking light

i. Number plate lights

j. Vehicle have additional external lights for the machinery’s work equipment, operation panel and work area.

k. Battery to be contained in an insulated box.

 

1.13 Instrumentation

a.Adequate instrumentation to be made up of service indicators as well as advance hazard warning devices. It shall include the following:

i.Fuel gauge

ii.Engine Coolant temperature gauge

iii.Engine oil level gauge

iv.Engine oil pressure gauge

v.Battery charging indicator

vi.Parking brake light

vii.Filters and fuel-water separator service indicators

viii.Speedometer and Odometer

ix.Reversing alarm

x.Engine speed tachometer

xi. Vandalism protection for instrument panel required

 

1.14 Protective Provision & Finish for Truck Chassis

a. Anti-corrosion provi-sions for the truck

For corrosion resistance be coated with 2 coats of oxide primer(or similar)on the inner and outer sides of the container,2 coats of synthetic enamel orange painting (or similar) on the outside and 2 coats of black expoxy paint(or similar)on the inner side.Paint must be resistant to abrasion and aggressive environments.

b. Final colour olive green.

2. Side-Loading Garbage Truck Superstructures

2.1 General Information

i. Loading Capacity 4600kg, GVW is not less than≥6000kg

ii. Engine horse power request: ≥80kw diesel engine ,4stroke,4cylinder or 6 cylinder.

iii. P.T.O.: 1,500-m~2,000-m;With High Pressure Pump With Indicator of water volume 

iv. With famous brand controll valve for the hydraulic system.

v. Manipulator lifting capacity,650kg

vi. Waste loading way : side loading with container

vii. Coefficient of waste compaction 1-3

viii. 250 litre tub, 250 ltr polyurethane onboard water tank.

2.2 Refuse Collecting Body:

i. Refuse container is made of hot rolled Q235 carbon steel sheet of thickness 5mm for bottom

4mm thick for side body.Corrugation in the side sheets for extra strength.

ii. Container nominal loading capacity -7.5cubic meters

iii. U-shape cross members form a strong square with the bottom plate.

iv. High capacity cyclone with 12” full opening rear gate drived by two cylinders.

v. Hydraulic full opening rear door assembly with 2 heavy-duty wing clamps.

vi: Container Dimension(L*W*H)(mm) as manufacturer design.

 

2.3 Ejector:

i. Heavy duty ejector made of U beams ,covered by 4mm steel sheets in capable to press the refuse from 3:1 up to 5:1 dependant on refuse nature.

ii. Powerfuel-double acting hydraulic cylinder moves the ejector forward and backward.

iii. Railways guide the movement of the ejector.

iv. The ejector moves backward to compress the refuse or to eject it outside of the container if the near-gate is opened.

v. The ejector initial position is very near to the front of edge of the container to reduce the dead volume of the container..

Vi:   Container Dimension(L*W*H)(mm)       3400*1870*1570 appox

 

2.4. Side Loading Mechanism(Manipulator):

i. Operates by means of two(02) hydraulic cylinders.

ii. Could be adapted for many refuse containers.

iii. Whole process hydraulically operated.

iv. Two side loading mechanisms available.

 

2.5 Hydraulic System:

i. Hydraulic gear pump connected to the P.T.O.

ii. Maximum pressure limites can be set according customer requirements. Nominal  22mpа setted.

iii. Automatic valves system to make continuous cycle through one touch from the operator.

iv. Hydraulic tank with filters lids,temperature gauge and level indicator are standard equipped.

v. 70Liters oil tank capacity equipped..

 

2.6 Painting:

i. The inner surface of the refuse container be painted with two layers priming coats after sand blasting,the it will be painted with two layers of anti-rust,anti-corrosion paints.

ii. The outer surface is painted by the same ways as the inner surface but the final paint is painted using the desired color and stamps.

2.7. Main Features:

i. Capacity 7.5 cbm

ii.Compression ratio 3:1 to 5:1

iii.Double sided loading(Option)

iv.Economic (5cbm refuse volume for each ton of vehicle GVW.)

v. Rear discharging witout tipping

vi.Rear Good maneuverability

vii.Low maintenance cost

viii Simple hydraulic system

ix. Minimum dead volume of refuse container.

x. Minimum truck length (no rear loading)

xi. Optional (Hydraulic bucket)

xii. Single or double hydraulci piston ejector.

xiii. Fast operation

xiv Lower cost

xv Durability

xvi Adaptability to climate and topography of middle east and Africa.

Xvii Hydraulic circuit,operates on the vehicle’s PTO

----------------------------------------------------Many more options available on request.--------------------------------------------

 

Inquiry
Please feel free to contact us.
Copyright©2013 CSCTRUCK All Rights Reserved.
Tel:+86-181 0722 3279 Email: info@csctrucks.com
Friendly Links: cscwrecker
Quick Index:A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Online Service