logo
Your current locatoin : Home >>What we sell >>WRECKER TRUCK >>Rollback Carrier

ISUZU 5Ton Economy Flatbed Carrier with Flipper Tail

  • Item No:ZJCCH3PA03V
  • Model:CSC5070TQZW2  
    Power:130HP  
  • Capacity:50000KG  
    Driving Mode:4×2  
  • Price: $0

I am interested in this truck /trailer

  • Overall Views : 1225
  • Read all reviews Submit your review
  • Share with friends:

CSCTRUCK ISUZU 5Ton Economy Flatbed Carrier with Flipper Tail is our entry level unit but it’s much more than that. With a strong 3.6 ton deck, you can carry a lot more than the usual 2 ton trucks. It is a great way to add units to your fleet at a low price. It will allow you to carry light duty trucks with ease.

5Ton Economy Flatbed Carrier with Flipper Tail is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling more vehicles faster. Owners and fleet operators alike will quickly discover that this light duty carrier is the best value that's available on the market today.

CHASSIS REQUIREMENTS

CHASSIS REQUIREMENTS
ur FB-5 is our entry level unit but it’s much more than that. With a strong 3.6 ton deck, you can carry a lot more than the usual 2 ton trucks. It is a great way to add units to your fleet at a low price. It will allow you to carry light duty trucks with ease. - See more at: http://www.metrotowtrucks.com/Carriers/FB-5.aspx#sthash.GJMZMFvR.dpuf
ur FB-5 is our entry level unit but it’s much more than that. With a strong 3.6 ton deck, you can carry a lot more than the usual 2 ton trucks. It is a great way to add units to your fleet at a low price. It will allow you to carry light duty trucks with ease. - See more at: http://www.metrotowtrucks.com/Carriers/FB-5.aspx#sthash.GJMZMFvR.dpuf

1.1 For mounted with 5Ton Economy Flatbed Carrier with Flipper Tail

1.2 Engine Model : 4HK1-TC (ISUZU)

Water-cooled,intercooling turbchargeing system, four-stroke cycle diesel engine with the following features:-

a. Four cylinders ,Vertical ,in line,        

b. Flywheel horsepower: 175hp(129kw)@2800rpm; Torque 500(N.m)/ 1300 (rpm)

c. Displacement 5193ml ;Engine manufactuer ISUZU, model: 4HK1-TC

i.Fuel tank cap with security lock

ii.Mechanical fuel injection pump

iii. Auxiliary fuel tank available

iii.Mechanical Governor

iv. Sufficient capacity to run the engine for not less than 20 hours for normal operating conditions.

d. Radiator fins and tubes to be made of copper

e. Natural aspiration

f. Pre-ignition heating system, Ignition system of engine have starter

g. Euro 4 emission standard

 

1.3 Cabin:

a. Short cabin,Full steel skeleton structure, covered with double layer steel plate;Can be tipped forwardly;High back damper seat with arm seat for driver;With inner A/C; with low temperature starting system, Cab be connected to the frame through buffer.Cab door’s windows could open and close easily.

b.Three person seating capacity front specify as :

i. Driver seat could be adjustable for high, front and rear movement, With seat belts. equipped with an absorber.

ii. Co-driver seat and mid-seat. With seat belts .

iii.Seats cushioned with weather resistant heavy duty vinyl

iv. Rear row with bunk.

c. Cold/hot airconditioner equipped

i. for Heating and cooling systems

ii. capable of maintaining a cabin temperature of +16°C in range of outside temperatures from -40°C to +40.

iii. Defrosting system that blow from below and is able to remove front and side frosting be provided.

d. Wide view toughened (Lamina-ted) wind screen for safety protection, and other glass be made with safety glass.

e. Full screen Two (2 No.) wipers sepcify as :

i. 2-speed plus “Intermittent operation”

ii. The wiper blades could be used during heavy snow and frosting when temperatures reach -40°C to +40°C.

f.Cab-interior be equipped with the followings:

i. Short-wave radio, tape player,

ii. Cigarette lighter

iii. Cup holder,

iv. Small thermos holder and other necessities for driver and passengers comfort.

v. Extingushers 2 nos.

 

g. Interior cabin, insulation and other accessories be covered with crack resistant in cold condition and made from non-combustible materials rubber paved in floor.

h.Horn  

 

1.4 Chassis Frame

a. Light-duty all strong steel constructed frame to be reinforced with cross members

b. Fitted with metal bow hooks front and rear.

c. Front bumper be made from strong metal.

d. Front fenders have mudflaps

e. Full rear steel mudguards with mud flaps

 

1.5 Transmission PTO and Drive Line

a.Constant speed synchromesh gearbox.

b.Floor-mounted manual shift gear lever

c. 5speed forward and 1 speed reverse

d. Max. geared speed: 110km/h

e.Manufacturer's standard PTO box is provided

f. Drive mode 4x 2

g.Gradability (max restart gradient off highway at GVW): 28%

h. Min turning radius > 11.5m

i. Brake distance >5m

 

1.6 Clutch

a. Single dry frictional discHydraulic boosting .

b. Specify diameter Φ430mm

1.7 Steering:

a. Whole circulation in ball, hydraulic booster ;Power assistance steering

b. Right hand steering control

1.8 Brakes

a. Service brake, Brake gap can be adjusted automatically, double circulation air brake system

b. Assistant brake, Engine exhaust brake

c. Park brake, Potential springs pressing on middle and rear wheels

d. Foot-operated engine brake

 

1.9 Axles

a. Front axle Double-shoe pneumatic brake, non-driving steering axle

b.Rear axle Double-shoe pneumatic brake, ductile casting casing, with hub redactor, double reduction driving axle

c. Rear axle rating: 6650kg maximum

d. Rigid I beam front axle,loading 3350kg maximum

1.10 Suspension

a.Front:

i. Heavy duty semi-elliptic metal leaf spring

ii.Double acting telescopic parallel steel shock absorber .

b.Rear:

i.Heavy duty semi-elliptic metal leaf spring

ii.Second stage helper spring

 

1.11 Wheels ,Rims&Tires

a.Four wheels. Pneumatic tires capable of being driven in snow, muddy roads and off road.

b.Good quality heavy-duty off road type suitable to full load rating, maximum speed and working conditions

c. Manufacturer's standard rims/ tires meet the following specifications: 

i.Tyre size: 7.00R16

 ii.Tube tires with flaps

iii.Bias Construction

iv.Ply rating; 14PR,

1.12 Electric System

a. 2*12V/180Ah

b. Generator 28V-35A ;could be capable of working at -40°C

c. Starter 5.4Kw/24V

d. Two headlights minimum; high/ low beam

e. Tail/stoplights

f. Direction signal lights for front and rear

g. Reversing light

h. Parking light

i. Number plate lights

j. Vehicle have additional external lights for the machinery’s work equipment, operation panel and work area.

k. Battery to be contained in an insulated box.

 

1.13 Instrumentation

a.Adequate instrumentation to be made up of service indicators as well as advance hazard warning devices. It shall include the following:

i.Fuel gauge

ii.Engine Coolant temperature gauge

iii.Engine oil level gauge

iv.Engine oil pressure gauge

v.Battery charging indicator

vi.Parking brake light

vii.Filters and fuel-water separator service indicators

viii.Speedometer and Odometer

ix.Reversing alarm

x.Engine speed tachometer

xi. Vandalism protection for instrument panel required

 

1.14 Protective Provision & Finish for Truck Chassis

a. Anti-corrosion provi-sions for the truck

For corrosion resistance be coated with 2 coats of oxide primer(or similar)on the inner and outer sides of the container,2 coats of synthetic enamel orange painting (or similar) on the outside and 2 coats of black expoxy paint(or similar)on the inner side.Paint must be resistant to abrasion and aggressive environments.

b. Final colour olive green.

UNDERLIFT SPECIFICATIONS

ISUZU 5Ton Economy Flatbed Carrier with Flipper Tail

UNDERLIFT SPECIFICATIONS

Retracted capacity1.8 ton (4,000 lbs)

Extended Capacity 0.9 ton (2,000 lbs)

Negative tilt angle-6°

DECK SPECIFICATIONS
Deck length    5943 mm (19.5')

Deck rating    3.6 ton (8,000 lbs)

WINCH SPECIFICATIONS
Quantity 1 winch Pulling force (on 1st layer)3.6 ton (8,000 lbs.)
Winch Type Worm Gear
Cable length 10 mm x 30 m (3/8" x 100')

UNDERLIFT SPECIFICATIONS

ISUZU 5Ton Economy Flatbed Carrier with Flipper Tail BRIEF INTRODUCE: 

Such FB-5T Car Carrier Wrecker truck mounted in ISUZU 4*2  truck  chassis which also well known as flat wrecker truck,light duty wrecker which is mounted with isuzu light truck chassis consist with chassis, hoisting equipment, lifting and towing equipment, hydraulic system, electric control system, truck body and the tool boxes etc.The tow truck wrecker can hoist, lift, draw mainly used in highway and city road traffic cleaning.

FB-5T is our entry level unit but it’s much more than that. With a strong 2.6 ton deck, you can carry a lot more than the usual 2 ton trucks. It is a great way to add units to your fleet at a low price. It will allow you to carry light duty trucks with ease.

As with all CSCWRECKER Tow Trucks, customization is the order of the day and we'll build your carrier the way you want it. Don't hesitate to inquire, standard and customized carriers are surprisingly inexpensive.

DETAILED SPECIFICATIONS:ISUZU 5Ton Economy Flatbed Carrier with Flipper Tail

The  economy carrier with flipper tail and 6200mm deck (11 degree load angle). This flat bed is suitable for carrying all passenger vehicles, light duty trucks and light duty equipment. 


with flipper tail and 19' 6" deck (9 degree load angle) The flipper could also delieried by SKD parts for your old chassis installation.

UNDERLIFT SPECIFICATIONS 

Retracted capacity1.8 ton (4,000 lbs

Extended Capacity0.9 ton (2,000 lbs

Negative tilt angle-6°

DECK SPECIFICATIONS

Deck length5943 mm (19.5')

Deck rating3.6 ton (8,000 lbs

WINCH SPECIFICATIONS

Quantity1 winch Pulling force (on 1st layer)3.6 ton (8,000 lbs.)

Winch Type Worm Gear Cable length10 mm x 30 m (3/8" x 100') 


 


 

*Steel checkered plate deck

*Center mount worm gear winch


*Manual spring tensional

*Manual free spool 

*Rear independent wheel lift

*Aftermarket scoop swivel pans

*Two (02) sets frame forks

*Standard 19feet 6 inch deck

* Eight(08)degree flipper tail

*One color paint black

*Dual manual controls

*Weather stripping on all tool box doors

*Frame fork adapters

*Multiple ties off points

*Independent light pylon

*Wheel pan holders

*Standard 36” inch tool box

Options:

·        Wireless remote control

·        1828 mm (72") side box

·        2590 mm (102") Wide bed

·        Frame forks

·        Wheel lift receivers for single / double tires

·        Removable rails

·        Full recovery tool package

·        Custom storage system

·        Front push bumper

·        XP, X-shape side puller

·        In cab controls

·        Full size LED light bar

·        LED - working lights, strobe lights, lights inside toolbox

·        Custom painting

·        Installation services and extended warranty

·        Tow operators education & training

   

MORE PHOTOS:ISUZU 5Ton Economy Flatbed Carrier with Flipper Tail

Front view  for ISUZU 600P Car tow wreker


Side view  for ISUZU 600P Car tow wreker


Rear view  for ISUZU 600P Car tow wreker


Rear view  for ISUZU 600P Car tow wreker .More detailed information please send us an inquiry 

TRAINING & ERECTION (if necessary):

An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.

 


 AFTER-SALE SERVICE WARRANTY:

Part 1

General Description

 

:

Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations.

Part 2

“Three Guarantees”Scope

:

A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning.

B)      Failure due to welding defect.

C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control.

Part 3

Non-“Three guarantees”Scope

:

A)      Users man-made failure lead vehicle  inadequate or incomplete

B)      Users, maintenance, adjustment of the fault caused by improper

C)      Users disassemble, repair leading to failure.

D)     User-modified to increase their own accessories or damage caused by.

E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage.

Part 4

Service Mode

:

A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service.

B)      Station personnel or commissioned directly designate a technical person tocontract on-site service.

Part 5

Procedures for handling procedures

:

A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number,model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications.

B)      Who meet the "three guarantees" the scope of the repair costs borne by our company.

C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user. 

Contact Service

Headquarter

:

CSCTRUCK LIMITED

ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, HongKong.

Tel:00852-2973 8324

Fax:00852-2115 9613

Email:service@csctrucks.com

Contact Service

Factory Works

:

XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD

Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300)Hubei China

Tel: 0086-0722-3591500              

Fax: 0086-0722-3591500

Http.//www.csctrucks.com          

E-mail:info@csctrucks.com

Contact Service

Zambia Works

:

LON WORLD SPECIAL TRAILER INDUSTRY LTD 

Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia.

Cell: 00260976981908

Contact :Tony Feng 

Inquiry
Please feel free to contact us.
Copyright©2013 CSCTRUCK All Rights Reserved.
Tel:+86-181 0722 3279 Email: info@csctrucks.com
Friendly Links: cscwrecker
Quick Index:A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Online Service