logo
Your current locatoin : Home >>What we sell >>GARBAGE TRUCK >>Road Sweeper Trucks

Cleaning Road Sweeper Truck

  • Item No:DFL1160BX
  • Model:CSC5160TXS  
    Power:210HP(155kw)  
  • Capacity:11.6CBM  
    Driving Mode:4*2  
  • Price: $0

I am interested in this truck /trailer

  • Overall Views : 1043
  • Read all reviews Submit your review
  • Share with friends:


Cleaning Road Sweeper Truck /11.6CBM

Cleaning Road Sweeper Truck offered by us are operated by fully qualified drivers and are regularly checked and maintained; all removable brush attachments are monitored and changed when necessary ensuring that continue to sweep through China.

 

Model: CSC5160TXS

Drive Mode: 4 * 2(LHD)

Nomial Loading Capacity,kg: 7400

Dust Hopper Capacity,cu.m: 6.0

Water Tank Capacity,cu.m:5.67

Gross Tare Weigth,kg: 10470

Overall Dimension,mm: 8830×2500×2940

Wheelbase,mm: 4700

1: Cleaning Road Sweeper Truck Chassis Specification

1.1  . Main Application

Cleaning Road Sweeper Truck for cleaning road, street named arisen road\vacuum street\broom sweeper truck and swivel sweeper truck mainly used by municipal they call them street sweeper truck or street sweeper equipment.

1.2 Engine Model : Water-cooled,intercooling;Turbo charged Cooling, four-stroke cycle ,direct injection, diesel engine with the following features:-

a. Vertical ,in line 6 cylinders        

b. Flywheel horsepower: 210HP(155kw)@2500rpm; Torque 800(N.m)/ 1400 (rpm)

c. Displacement 6700ml;Engine manufactuer Cumminsmodel: ISDe210 30

d. Radiator fins and tubes to be made of copper

e. Natural aspiration

f. Pre-ignition heating system, Ignition system of engine have starter

g. Euro 3 emission standard

1.3 Cabin:

a. Short cabin,Full steel skeleton structure, covered with double layer steel plate;Can be tipped forwardly;High back damper seat with arm seat for driver;With inner A/C; with low temperature starting system, Cab be connected to the frame through buffer.Cab door’s windows could open and close easily.

b.Three person seating capacity front specify as :

c. Cold/hot airconditioner equipped

d. Wide view toughened (Lamina-ted) wind screen for safety protection, and other glass be made with safety glass.

e. Full screen Two (2 No.) wipers sepcify as :

f.Cab-interior be equipped with the followings:

g. Interior cabin, insulation and other accessories be covered with crack resistant in cold condition and made from non-combustible materials rubber paved in floor.

h.Horn    

1.4 Chassis Frame

a. Light-duty all strong steel constructed frame to be reinforced with cross members

b. Fitted with metal bow hooks front and rear.

c. Front bumper be made from strong metal.

d. Front fenders have mudflaps

e. Full rear steel mudguards with mud flaps

 

1.5 Transmission PTO and Drive Line

a.Constant speed synchromesh gearbox.

b.Floor-mounted manual shift gear lever

c. 5 speed forward and 1 speed reverse

d. Max. geared speed: 90km/h

e.Manufacturer's standard PTO box is provided

f. Rear two wheels drive with 4×2 wheel formula

g.Gradability (max restart gradient off highway at GVW): 25%

h. Min turning radius > 8.8m

i. Brake distance >4.2m

1.6 Clutch

a. Single dry frictional discHydraulic boosting .

b. Specify diameter Φ325mm

1.7 Steering:

a. Whole circulation in ball, hydraulic booster ;Power assistance steering

b. Right hand steering control

1.8 Brakes

a. Service brake, Brake gap can be adjusted automatically, double circulation air brake system

b. Assistant brake, Engine exhaust brake

c. Park brake, Potential springs pressing on middle and rear wheels

d. Foot-operated engine brake

1.9 Axles

a. Front axle Double-shoe pneumatic brake, non-driving steering axle

b.Rear axle Double-shoe pneumatic brake, ductile casting casing, with hub redactor, double reduction driving axle

c. Rear axle rating:10000kg maximum

d. Rigid I beam front axle,loading 6000kg maximum

1.10 Suspension

a.Front:

i. Heavy duty semi-elliptic metal leaf spring

ii.Double acting telescopic parallel steel shock absorber .

b.Rear:

i.Heavy duty semi-elliptic metal leaf spring

ii.Second stage helper spring

1.11 Wheels ,Rims&Tires

a.Four wheels. Pneumatic tires capable of being driven in snow, muddy roads and off road.

b.Good quality heavy-duty off road type suitable to full load rating, maximum speed and working conditions

c. Manufacturer's standard rims/ tires meet the following specifications: 

i.Tyre size: 275/80R22.5(ALL WHEELS)

ii.Tubeless tires with flaps

iii.Bias Construction

iv.Ply rating; 14PR,

v. Rim type:  Slip-on type with ring locker,22.50

1.12 Electric System

a. 2*12V/180Ah

b. Generator 28V-35A ;could be capable of working at -40°C

c. Starter 5.4Kw/24V

d. Two headlights minimum; high/ low beam

e. Tail/stoplights

f. Direction signal lights for front and rear

g. Reversing light

h. Parking light

i. Number plate lights

j. Vehicle have additional external lights for the machinery’s work equipment, operation panel and work area.

k. Battery to be contained in an insulated box.

1.13 Instrumentation

a.Adequate instrumentation to be made up of service indicators as well as advance hazard warning devices. It shall include the following:

i.Fuel gauge

ii.Engine Coolant temperature gauge

iii.Engine oil level gauge

iv.Engine oil pressure gauge

v.Battery charging indicator

vi.Parking brake light

vii.Filters and fuel-water separator service indicators

viii.Speedometer and Odometer

ix.Reversing alarm

x.Engine speed tachometer

xi. Vandalism protection for instrument panel required

1.14 Protective Provision & Finish for Truck Chassis

a. Anti-corrosion provi-sions for the truck

For corrosion resistance be coated with 2 coats of oxide primer(or similar)on the inner and outer sides of the container,2 coats of synthetic enamel orange painting (or similar) on the outside and 2 coats of black expoxy paint(or similar)on the inner side.Paint must be resistant to abrasion and aggressive environments.

b. Final colour olive green.

2: Cleaning Road Sweeper Truck Superstucturer

2.1 Structurer:

a. The center vacuum disk can effectively remove waste from tens of microns to the leaves, gravel, stones, bricks,etc.

b. The auxiliary suction hose’s working diameter can reach 10m, which can used for green belt and blind corner manual work can’t reach. No secondary dust problem, and the sweeping rate up to 99% or more.It can be widely used for road cleaning, moreover, it is the ideal sanitation equipment for the places of square, park, campus, housing area, parking lot, dock, airport, cement plant, electric power plant, steel plant, etc.

2.2  Principal Features

a. Simple Structure: No hydraulic motor Slewing Mechanism, no sweeping brushes system

b. Easy operation: Only through the control panel in Cab, the operator can control the auxiliary engines on/off, fan speeds up/down, dust sucking mouths up/down, rear doors open/close, waste hoppers lift/fall, water sprays on/off.

c. No secondary dust: Pure suction type, no reverse blow, adopt unique, advanced, high efficient filter system

d. Low working cost: No sweeping brush frequent replacement, just bits of rubber wearing parts. It need low maintenance cost every year.

e. Excellent dust removal efficiency: Garbage collected into the hopper, after several times of dust, through multi-stage gravitational fallout and inertial dust particles achieve dust separation, afford to keep them truly suck up and stay. In addition, with independent research and patented dry dust cleaning device, it can achieve automatic high performance cleaning, without staff participation (suitable for place of heavy dust).

f. Strong adaptability: Equipped with an infrared camera, long duration, regardless of day or night, rain, wind or the cold of winter, it can also be used as usual, reflecting the all-weather, all-day job of the design concept.

g. Improving the cleaning efficiency, reducing the cost of cleaning: One suction sweeper vehicle is equal to more than 30 cleaners, saving the cost of labor and personnel management, while also saving the cost of cleaning equipments purchase.

h. Manual loading is a thing of the past as are problems caused by blockages that are typically associated with other systems.

i. The system is simple and convenient to use and is ideal for the collection of debris in difficult to reach areas.

2.3 Super Structurer & Accessories

a. Road Cleaning System

i. A sweeping system that combine the benefits of the mechanical collection with those of the vacuum system.

ii. Maximum Running speed: Not less than 90km/hr

iii. Working speed: 3 - 40 km/h

iv. Minimum turning radius: Not more than 8 meters

v. Cleaning width:   Not less than 3m

vi. Dust hopper capacity: 6m³

vii. Water tank capacity: 5.67m³

viii. Maximum size of debris  Not smaller than 80 mm (diameter of pebble)

ix. Noise level 80 dB (a) or less when measured at driver’s ear position with brushes, blowers and Air conditioners and widows of driver’s cabin closed.

x. Maximum Dumping    Height not less than 1300mm

xi. Dumping gate opening:Inside cab/remote control/Automatic

xii. Optional ;Arranged for dumping     

b. Cleaning Mechanism

i. The side brushes and the main cylindrical brush mechanically load the debris inside the hopper by the means of a vertical conveyor

ii. Vacuum is used simultaneously to keep the dust constantly under control.

iii. A simple patented system that is able to collect and load over half a tonne of debris per minute, which allows the collection of a wide range of debris, the collection of a wide range of debris, from the finest dust to more voluminous objects such as bottles, large gravel and even fruit or vegetable market boxes.

iv. Dust hopper

(a)   Structure: Left side dump is preferable

(b) Material:    Made of welded steel plate

(c) Effective capacity:    11.6m3

(d) Inner side of tank:    Urethane coating having thickness of 1.5 mm or more

(e) Bottom of hopper and inner side of door with stainless steel

c. Auxiliary Engine

i. Type: Water cooled diesel

ii. Rated output: Not smaller than 75 KW

iii. Maximum torque: Not smaller than 380 ……

iv. Fuel tank:Tank provided to vehicle shared

v. Battery: Battery provided to vehicle shared

 

d. Blower

i. Type: Single stage centrifugal type

ii. Maximum blowing volume: 300 m3/min or more

iii. Maximum static pressure: 10 kPa or more when closed

iv. Material of fan:   High tension steel

e. Gutter Brush

i. Diameter:    750 mm or larger

ii. Material:     Steel wire

iii. Quantity:    One (1) on each side

iv. Tilt mechanism: Hydraulic system / pneumatic

f. Sweeping Brush

i. Size:    400 mm (diameter) x 750 mm (length) or larger

ii. Material:     Steel wire

iii. Quantity:    One (1) on each side

iv. Tilt mechanism  Left side brush with hydraulic / pneumatic tilt mechanism

Sweeping brush may be omitted if the cleaning mechanism is designed in such a way that no sweeping brush is required to collect the dust.

g. Vacuum Suction Brush

i. Size:    400 mm (diameter) x 600 mm (length) or larger

ii. Material:     Steel wire or polypropylene

iii. Quantity:    One (1) for each side

 

h. Suction Brush Supporting Tire

i. Type:    Tubeless tire

ii. Quantity:     Two (2) for each side

i. Suction Hose: Inner diameter:   300 mm or larger

j. Hydraulic Sys: Hydraulic unit of adequate capacity shall be provided to operate various parts of the pavement cleaning system with the speed suitable for the operation.

k. Water Cleaning:

i. Maximum Water Flow: 120 l/min. or more

ii. Effective capacity: 5670 litre

iii. Tank inner wall coating: Tar-epoxy resin finish

l. Scattering –proof Device: Suitable device such as cover and curtain shall be provided around the dust sweeping and collection part of the vehicle to prevent dust and pebbles from scattering during the cleaning operation. The mechanism shall be simple but effective without requiring the adjustment or replacement. State the method provided.

m. Vacuum Suction Unit

i. Mud suction tube: Manually controlled telescope type

ii. Structure:Double construction made of steep pipe

iii. Nominal diameter :200 mm

iv. Suction Hose

(a) Type:  Flexible rubber hose

(b) Size:  200 mm (diameter) preferred

v. Suspension mechanism   

(a) Type:  Hydraulic with spring balancer

(b) Maximum load: More than 65 kg

n. Shock Absorber Against Rear-end Collision

The attachment shall be made of anti-corrosive materials. It shall have the construction that permits easy mounting on the vehicle and withstand the vibration while the vehicle is running. It shall have sufficient strength and shall not fall down when hit from behind.

o. Warning light: A warning light system shall be provided to the vehicle and placed firmly on the top of the signboard. It shall meet the requirements listed below.

i: Length:530 - 610 mm x 2

ii. Colour        Yellow

iii. Rated voltage           24 V

iv. Rotating warning light             

v. Rotation      Approx. 160 / min

vi. Bulb   Halogen 55 watt preferred;Quantity      2

vii. Flashing light;Flashing     180 / min (full brightness); 110 / min (dimmed)

viii. Bulb  Xenon discharge bulb 12 W preferred; Quantity  2

p. Accessories

i. Standard attachment: 1 set

ii. Standard tool set: 1 set

iii. Floor mat:1 set

iv. Buzzer for back-up:1 set

v. Emergency flare: 1 set

vi. Air conditioner:1 set

vii. Hose for cleaning:1 set (with nozzle and more than 8 meter in length)

viii. Drain hose:1 set (75 mm dia. X 4 meter with cock)

ix. Water poring hose:1 set (75 mm x 4 meter);May be omitted if the water intake mechanism does not require water poring hose.

xi. Gutter brush with core:2 sets with scattering prevention unit

xii. Sweeping brush with core:1 set; May be omitted if the sweeping brush does not require sweeping brush.

xiii. Suction brush:2 sets

q. Free Spare parts Supported :The following provided spare parts for free

i. Tire with wheel    One (1) for each type of tire

ii. Fuse:The same number and types as used.

iii. Gutter brush with core:4 sets with scattering prevention unit

iv. Suction brush:4 sets

v. LED display unit (block) :2 sets

vi. Power supply unit (printed circuit board) :1 set

vii. Control unit (printed circuit board):1 set

viii. Bulb for warning light:2 pieces each for the types used.

2.4  Its customers have chosen CSCTRUCK products mainly because:

1)They have ultimate performance for very dirty roads

2)The design of the machine are made for maximum efficiency and minimum consumption (for both fuel and brushes)

3)The flexibility of the production department, which facilitates the ability to adapt the machine to local requirements

4) All the critical parts in our products are from worldwide suppliers, so it is easy to find a dealer everywhere in the world if something were to happen.

5) Continuous innovations that make the difference.
Inquiry
Please feel free to contact us.
Copyright©2013 CSCTRUCK All Rights Reserved.
Tel:+86-181 0722 3279 Email: info@csctrucks.com
Friendly Links: cscwrecker
Quick Index:A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Online Service