logo
Your current locatoin : Home >>What we sell >>TANK TRUCK >>Septic Pumper Truck

6CBM Vacuum Sewage Truck

  • Item No:
  • Model:  
    Power:120ps  
  • Capacity:6CBM  
    Driving Mode:4x2  
  • Price: $0

I am interested in this truck /trailer

  • Overall Views : 376
  • Read all reviews Submit your review
  • Share with friends:

The vacuum truck is intended for vacuum cleaning of cesspools and transportation of fecal liquids to disposal area. Special equipment must consist of the tank, driven vacuum pump, signal-safety device, receiving manhole with suction hose, control valves on the pipeline, platforms and additional electrical equipment. Filling of the tank is carry out under the impact of vacuum which is produced by vacuum pump, tank gravity discharge or air pressure from the vacuum pump.

CHASSIS FEATURES

Cab:Tilbale, Three (3) persons seating capacity,with 1 bunk.                                                                                                                       

  Left-Hand Drive Steering Wheel                              Power asssitance steering                                 FLoor Rubber Covering

  Power-take-off to drived vacuum pump                   Hydraulic lifting/tipping gear with control system


Engine:JE493ZLQ5(ISUZU),Displacement 2.771L,88kw(116ps)@3200rpm,285N.m@2000rpm, Euro 5                                                    

  Lubricant filtration                                                    Forced lubrication                                               Natural aspiration 

  Direct Injection Fuel System                                    Vertical ,in line ,Water-cooled, four-stroke cycle diesel engine


Transmission:WLY535(Local Brand),Torque 350N.m, Gears nos 5+1 ,Oil Capacity 3.5L                                                                           

  Floor-mounted manual shift gear lever                    Constant Speed Synchromesh Gearbox            5 speed forward and 1 speed reverse 

  Manufacturer's standard PTO box is provided


Clutch:Specify diameter Φ 325 mm, Light-duty, Dry Single Plate; Hydraulic Actuation                                                                            


Chassis Frame: Sectional Modulars 170mm×60mm×5mm                                                                                                                            

  Full rear steel mudguards with mud flaps               Front towing hook                                               Front steel bumper

  Front fenders mudflaps                                           Heavy-duty all steel constructed frame to be reinforced with cross members


Axles: Rear 1061 Die Casting,Ratio 5.830                                                                                                                                                       

  4x2 WD truck; rear axle drive                                 Hub reduction floating rear axle                          Rigid I beam front axle

  Torque proportioning differ-ential rear axle with foot-operated or otherwise differential lock


Suspension: Leaf Spring Nos. front 3,Rear 3+2 reinforcement                                                                                                                    

  Front Heavy duty semi-elliptic leaf spring              Double acting telescopic shock absorbers          Second stage helper spring

  Rear Heavy duty semi-elliptic leaf spring

Steering: Left Hand Drive Steering Control, Power Assistance Steering                                                                                                    


Brakes: Front Disc , Rear Drum Brake System                                                                                                                                              

  Brake boosters with protection as applicable       All drum internal expanding                                  Foot-operated engine brake

  Mechanical release parking brakes                      Automatic drain valve on air tank(s)                     Independent dual line system 

  Power assisted hydraulic actuation service brakes built into all four wheels

 

Wheels ,Rims&Tires:8.25R16LT 6PR 6 Nos.+1 Spare tire with Carrier                                                                                                         

  Single front; double rear wheels                          Manufacturer's standard rims.
  One spare rim with tire mountable on a suitable carrier on each vehicle.

  Good quality heavy-duty on/off road type suitable to full load rating, maximum speed and working conditions


Protective Provision & Finish for Truck Chassis                                                                                                                                            

  Anti-corrosion provi-sions for the truck

  Final colour finish white.


HOWO Light-duty Chassis Parameters:                                                                                                                                                               


Weight

Chassis Weight(kg)

2565

Loaded(kg)

4495

Towing(kg)


Measurement

Size

Length(mm)

5995

Width(mm)

2150,2250,2350,2498

Height(mm)

2500,2550

Wheelbase(mm)

3160,3280

Chassis-Ground(mm)

210

Performance

Max Speed(km/h)

95

Suggestion Speed(km/h)

50-70

Climb(%)

25

Turning Radius(m)

13.4,13.8



CSCTRUCK Vacuum truck is designed to collect, by suction, and transport sewage and sludge. Truck mounted with sewage pump consists of a sub frame connected to the truck chassis, a cylindrical tank, a hydraulically opening full diameter tailgate and the vacuum system powered by the PTO.  Optional truck chassis with Isuzu , Jac, JMC,Dongfeng, SHACMAN etc. Also body only available for your own truck chassis base on your chassis drawing designed specificly.

The vacuum truck works by the principle of trusting and breaking effects of high pressured water for opening any blockage shutting the sewer system and after destroying the blockage; all the remaining sludge, waste water and half solid waste is collected inside the sludge tank by the strong vacuum force created by means of the vacuum pump.


VACUUM TANK SPECIFICATION

Vac-Jet Tank:Sludge Tank: 6CBM,Front&Rear Lids 6mm Carbon Steel Q345A                                                                                          

  Profile:High capacity cyclone,front and rear Lids 6mm Carbon Steel Q345A
  Stiffening Rings: Cold shaped profiles, as external stiffening rings.
  Rear Lid Opening: By an upside hinge, vertically opening type with 2 units hydraulic cylinders( Double acting hydraulic cylinder.).
  Rear Lid Locking: Rear door locked by assembly with 6 heavy-duty wing clamps.
  Safety Support: mounted for safe working under a tipped tank.
  Discharging spillway: Fabricated in the rear of the tank in order to keep the rear bumper clean.
  Level indicator: Acrylic level observation tubes
  Fresh water inlet: DN80 camlock coupling.
  Manhole: 500 mm. Lockable Cover.
  Sludge Suction: Manually controlled, 4" and 5" suction valves with quick coupling.
  Sludge Discharge: Manually controlled, gate type, 6" discharge valve with a quick coupling.

Vacuum Pump: 50QZXDH-68/7000 WEILONG(local brand)                                                                                                                           
  Capacity: 352.8 m3/hour                                                           Max Vacuum: % 93                   Absolutepressure:7000Pa
  Mounting: Vacuum pump be located under the vacuum tank.        Installation: Air installation is constructed with steel pipes.

Safety System:Floating ball shut off system                                                                                                                                                  
  One system placed in top of the tank,the other system place between vacuum pump and first safety system.
  Conssit with stainless steel floating ball - shut off system, a 70-liter overflow tank and manual discharging valve.
  Pressure relief system: Mounted on the vacuum installation
  Providing the secure working conditions in case of excessive pressure force created in the vacuum tank.

Accessories:                                                                                                                                                                                            
  High pressure gun: along by side of the tank
  Hose trays: 1 unit with 8-meter cable 
Access ladder: 200 kg lifting capacity
  Warning lamp: 1 unit fixed at the rear of the tank , 1 unit with 6 meter extension cable
  Mud guard: Polyethylene, made for the rear wheels of the truck
  Suction Hoses: 16m, high endurance suction hoses 4", 4*4m , quick couplings 4"
  Water filling hose : 2 units , 10-meter length
  Other accessories : Toolbox, fire fighting set, jack, air hose with pressure meter
  Painting: Inside with two layers of epoxy paint. Outside with two layers primer & two finish layers of protective paint.
(Outside color can be chosen by the end user)

STANDARD FEATURES                                                                                                                                                                           

  Deep Vertical Suction(deepth 8m)       Qualitied Vacuum Pump   Automatic Release Valve        Reliable Safety System

  Operating and maintenance manuals and CD's in English language   Automcatic Weilded Vac tipping tank,water tank truck.

Inquiry
Please feel free to contact us.
Copyright©2013 CSCTRUCK All Rights Reserved.
Tel:+86-181 0722 3279 Email: info@csctrucks.com
Friendly Links: cscwrecker china fire trucks
Quick Index:A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Online Service